The Rokinon Auto Teleconverter is a valuable tool for photographers and videographers, as it allows users to increase the effective focal length of their lenses, enabling them to get closer to their subjects without physically moving. However, like any optical accessory, there may be times when you need to remove it—whether to change lenses, adjust your shooting setup, or simply because you no longer need the extra focal length.
If you’re new to using the Rokinon Auto Teleconverter or just unsure how to remove it properly, this guide will walk you through the process step by step. By following these instructions, you can safely detach the teleconverter from your camera without causing damage to your gear.
Step 1: Turn Off Your Camera
Before you begin removing any lens or teleconverter, it’s always a good practice to turn off your camera. This will prevent any electrical malfunctions that could occur if the camera remains on while you’re detaching components. While the Rokinon Auto Teleconverter itself doesn’t typically draw power from the camera, it’s still wise to make sure your equipment is turned off to ensure the safety of both your camera and lens.
Step 2: Hold Your Camera or Lens Securely
To avoid any accidents, make sure you have a solid grip on your camera or lens. Hold the camera with one hand, supporting the body, and use your other hand to grasp the lens or teleconverter. Having both hands on your equipment gives you better control and prevents any sudden movements that might cause damage.
Step 3: Locate the Connection Points
The Rokinon Auto Teleconverter attaches to both your camera body and your lens. Depending on the model of your teleconverter, it will typically have a metal mount on one end (which attaches to the camera body) and a similar mount on the other end (which attaches to the lens).
You’ll want to locate the lens release button on your camera body (usually found near the lens mount). Similarly, there will be a release button on the teleconverter itself, which can help facilitate the removal process.
Step 4: Press the Release Button
To begin the removal process, press and hold the lens release button on your camera body (or teleconverter, depending on which part you’re detaching). For most Rokinon Auto Teleconverters, this is a simple locking mechanism that ensures the teleconverter stays securely in place.
Once you’ve depressed the release button, gently twist the teleconverter counterclockwise (left) to loosen it from the camera or lens mount. Some models may require a bit more force, but avoid using excessive pressure, as this can damage both the teleconverter and your camera.
Step 5: Separate the Teleconverter
After the teleconverter is loosened, carefully pull it away from both the camera and the lens. Make sure you’re holding the teleconverter securely by its metal mounting ring to avoid any accidental drops. Keep a steady hand and avoid applying any lateral force to the connectors, as this could bend or damage the pins that communicate with the camera’s autofocus or aperture system.
Step 6: Store the Teleconverter Safely
Once removed, it’s essential to store the Rokinon Auto Teleconverter properly to ensure it remains in good condition. Place it in a padded lens pouch or storage case to protect it from dust, dirt, and potential scratches. If you’re not planning on using the teleconverter for a while, it’s also a good idea to place lens caps on both ends of the device to keep the glass elements free from debris and smudges.
Step 7: Reattach Your Lens (If Necessary)
If you removed the Rokinon Auto Teleconverter to switch lenses, now is the time to attach your lens directly to the camera body. Align the lens with the mount on your camera, making sure the markings on the lens and camera body match up. Turn the lens clockwise until it clicks securely into place.
Tips for Safely Removing the Rokinon Auto Teleconverter
- Work in a Clean Environment: Dust and dirt can easily damage your lenses and teleconverter. Always work in a clean environment to avoid introducing contaminants.
- Handle the Teleconverter by the Metal Mount: To avoid smudging or scratching the glass elements, handle the teleconverter by its metal mounting rings only.
- Check for Debris: Before reattaching the teleconverter, always check the lens and camera mounts for any dirt or debris that might cause a poor connection or damage.
- Use a Lens Cleaning Kit: If you notice any dust or fingerprints on the teleconverter’s glass elements, use a lens cleaning kit with a microfiber cloth to gently clean the surface.
Conclusion
Removing the Rokinon Auto Teleconverter from your camera setup is a straightforward process, but it’s essential to follow the correct steps to avoid damaging your equipment. By turning off your camera, securely holding your gear, pressing the release button, and carefully detaching the teleconverter, you can ensure the process goes smoothly. Proper storage is equally important for maintaining the longevity of your teleconverter, ensuring that it’s ready for your next photographic adventure.